力学与工程科学系2019-2023年科研成果情况

发布时间:2024-10-28

一、 概况

1. 2019-2023年,获得省部级科技奖励4项;授权发明专利27件;

2. 出版学术专著3部。发表学术论文360余篇,部分成果发表在力学、物理、材料和工程领域的顶级期刊上:

—— JMPS、JFM、CMAME、IJP、Int. J. Heat Mass Trans.、力学学报

—— PRL、PoF、PNAS、Matter、ACS Nano、物理学报

—— Mater. Sci. Eng: R、AM、AFM、CST、Comp. Part A、Acta. Mater.

二、 科技奖励

1. 航空复合材料关键结构件高精度纤维铺放制造关键技术及应用安徽省科学技术一等奖 J-2022-1-059-D7 2023年08月

2. 碳纤维复合材料高精度缠绕设计与成型关键技术及应用 中国复合材料学会科学技术二等奖 20220201-R01 2022年11月

3. 超大跨距薄壁型船舶创新开发与建造示范 中国产学研合作创新成果奖二等奖 20226063 2022年12月

4. 严酷环境高铁相高抗蚀胶凝材料制备及其工程应用开发 中国建筑材料联合会.中国硅酸盐学会建筑材料技术发明一等奖2021-F-1-01-R08 2021年11月

三、 学术论文:

近五年学位点代表性论文清单

序号

论文名称

刊物、会议名称

发表

年份

本学位点

主要作者

国际合作

1

Fracture toughness of thermoelectric materials

Materials Science and Engineering: R: Reports

2021

李国栋

2

Nanotwin-induced ductile mechanism in thermoelectric semiconductor PbTe

Matter

2022

李国栋

3

Stacking fault-induced strengthening mechanism in thermoelectric semiconductor Bi2Te3

Matter

2023

李国栋

4

Synergetic Enhancement of Strength-Ductility and Thermoelectric Properties of Ag2Te by Domain Boundaries

Advanced Materials

2023

段波

5

Dense dislocations induced ductile SnTe thermoelectric semiconductor over a wide range of temperatures

Journal of Materials Science & Technology

2022

段波

6

Mn-In-Cu共掺杂优化SnTe基材料的热电性能

物理学报

2021

段波

7

Pressure induced convergence of conduction bands in Al doped Mg2Si: Experiment and theory

Journal of Materiomics

2019

段波

8

A Physical Model of Nanotwin Unit and Orientation Organization for Designing Mechanical Performance: Cases of InSb, GaAs, ZnS

Advanced Functional Materials

2023

李国栋

9

An integrated system of sinusoidal-corrugated plate heat exchanger and thermoelectric modules for wastewater heat recovery

Energy Conversion and Management

2022

翟鹏程

10

Micromechanical model for effective thermoelectric properties of thermoelectric composite containing ellipsoidal inclusions with interfacial resistances

International Journal of Heat and Mass Transfer

2023

文鹏飞

11

Performance of annular thermoelectric couples by simultaneously considering interface layers and boundary conditions

Applied Thermal Engineering

2020

陈刚

12

SiC@BaTiO3 core-shell fillers improved high temperature energy storage density of P(VDF-HFP) based nanocomposites

Composite Science and Technology

2022

周令

13

Sandwich-structured polymer nanocomposites with Ba0.6Sr0.4TiO3 nanofibers networks as mediate layer inducing enhanced energy storage density

Composite Science and Technology

2021

周令

14

Structural failure of layered thermoelectric In4Se3-δ semiconductors is dominated by shear slippage

Acta Materialia

2020

翟鹏程

15

Dramatically reduced lattice thermal conductivity of Mg2Si thermoelectric material from nanotwinning

Acta Materialia

2019

翟鹏程

16

Enhanced thermoelectric performance of Te-doped skutterudite with nano-micro-porous architecture

Scripta Materialia

2019

翟鹏程

17

The thermoelectric and mechanical properties of Mg2(Si0.3Sn0.7)0.99Sb0.01 prepared by one-step solid state reaction combined with hot-pressing

Journal of Alloys and Compounds

2021

文鹏飞

18

Microalloyed medium-entropy alloy (MEA) composite nanolattices with ultrahigh toughness and cyclability

Materials Taday

2021

冯骁彬

19

A model for photothermal  conversion of graphene-filled nanocomposites under NIR irradiation

Smart Materials and Structure

2020

李芳

20

The effective elastic properties of chain-like structural particle-reinforced composites

Mechanics of Materials

2020

李芳

21

An analysis of flexoelectric coupling associated electroelastic fields in functionally graded semiconductor nanobeams

Journal of Applied Physics

2021

褚亮亮

22

Nonlinear analysis of functionally graded flexoelectric nanoscale energy harvesters

International Journal of Mechanical Sciences

2020

褚亮亮

23

Thermally induced nonlinear dynamic analysis of temperature dependent functionally graded flexoelectric nanobeams based on nonlocal simplified strain gradient elasticity theory

European Journal of Mechanics/A Solids

2020

褚亮亮

24

The asymptotic homogenization evaluation of effective mechanical property of the C/C-ZrC composite by the reconstruction technique

Composites Structures

2023

刘立胜

25

Grain size effect of FCC polycrystal: A new CPFEM approach based on surface geometrically necessary dislocations

International Journal of Plasticity

2022

蒋茂圆

26

Substrate elasticity and surface tension mediate the spontaneous rotation of active chiral droplet on soft substrates

Journal of the Mechanics and Physics of Solids

2022

赖欣

27

Multiphase large-eddy simulations of human cough jet development and expiratory droplet dispersion

Journal of Fluid Mechanics

2022

赖欣

28

Peridynamic Modeling of Brittle Fracture in Mindlin-Reissner Shell Theory

Computer Modeling in Engineering & Sciences

2022

赖欣

29

An immersed transitional interface finite element method for fluid interacting with rigid/deformable solid

Engineering Applications of Computational Fluid Mechanics

2019

刘立胜

30

Peridynamic Stress is the Static First Piola–Kirchhoff Virial Stress

International Journal of Solids and Structures

2022

刘立胜

31

单轴压缩下Ti3B4的力学、电学性能及变形机制的第一性原理研究

物理学报

2020

李君

32

A modified rate-dependent peridynamic model with rotation effect for dynamic mechanical behavior of ceramic materials

Computer Methods in Applied Mechanics and Engineering

2022

刘立胜

33

Effects of water on the mechanical properties of silica glass using molecular dynamics

Acta Materialia

2019

梅海

34

The effect of heating rate on sintering mechanism of alumina nanoparticles

Journal of the American Ceramic Society

2022

梅海

35

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Journal of the European Ceramic Society

2020

任琳

36

High conductive graphene assembled films with porous micro-structure for freestanding and ultra-low power strain sensors

Science Bulletin

2020

任琳

37

Hygrothermal durability of glass and carbon fiber reinforced composites – A comparative study

Composites Structures

2019

钟愉承

38

冲击波诱发含孔Mg-3Al-1Zn 合金位错形核及演化行为研究

力学学报

2022

徐爽

39

The shock response and spall mechanism of mg-al-zn alloy: molecular dynamics study

Acta Mechanica Solida Sinica

2022

徐爽

40

Atomistic simulation on the nano-scale oxidation of Fe-Cr alloy surfaces and the diffusion behavior of oxygen

Chemical Physics Letters

2023

徐爽

41

Giant near-elastic deformation in novel porous Cu-Al-Mn shape memory alloys

Materials Letters

2023

刘记立

42

Hysteretic behavior and resilience analysis of a new self-centering buckling restrained braces

Soil Dynamics and Earthquake Engineering

2023

黄维

43

Adsorption behavior of carbonic acid on γ- dicalcium silicate surface from molecular simulations

Journal of the American Ceramic Society

2022

吕林女

44

Electrical Resistance and Capacitance Responses of Smart Ultra-high Performance Concrete with Compressive Strain by DC and AC Measurements

Construction and Building Materials

2022

孙明清

45

Investigation on expansion effect of the expansive agents in ultra-high performance concrete

Cement and Concrete Composites

2020

吕林女

46

Evolution of aluminate hydrate phases in fly ash-cement system under the sulfate conditions

Construction and Building Materials

2020

吕林女

47

The effect of superelastic strain on the damping capacity in columnar-grained Cu-Al-Mn shape memory

Journal of Alloys and Compounds

2019

刘记立

48

Simulation Analysis of Cylindrical Shell Cavity Noise with Melamine Foam Lining

Shock & Vibration

2021

晏石林

49

Multi-objective optimization of the fiber-reinforced composite injection molding process using Taguchi method, RSM, and NSGA-II

Simulation Modelling Practice and Theory

2019

晏石林

50

树脂传递模塑成型工艺中嵌套效应引起渗透率变异的实验与数值模拟

复合材料学报

2021

晏石林

51

考虑界面效应的GFRP复合材料蠕变模型

复合材料学报

2021

朱四荣

52

Bending performance of curved sandwich panels comprising GFRP face sheets and web cores: Experimental investigation and theoretical model

Thin-Walled Structure

2022

陈建中

53

Long-term ring stiffness of fiberglass-reinforced plastic mortar pipes

Materials Testing

2021

陈建中

54

Effects of graphene oxide on microstructure and mechanical properties of isotropic polydimethylsiloxane-based magnetorheological elastomers

Rheologica Acta

2022

张江涛

55

Experimental and modeling investigations on the quasi-static compression properties of isotropic silicone rubber-based magnetorheological elastomers under the magnetic fields ranging from zero to saturation field

Smart Materials and Structures

2022

张江涛

56

A magnetic field- and frequency-dependent dynamic shear modulus model for isotropic silicone rubber-based magnetorheological elastomers

Composites Science and Technology

2021

张江涛

57

Simultaneously enhancing the strength and toughness of short fiber reinforced thermoplastic composites by fiber cross-linking

Composites Science and Technology

2022

钟愉承

58

Environmental durability of carbon/flax fiber hybrid composites

Composite Structures

2020

钟愉承

59

Nonequilibrium thermodynamic modeling of case II diffusion in glassy polymers

Journal of the Mechanics and Physics of Solids

2023

李旭

60

Effect of temperature and strain rate on the tension response of uncured rubber: Experiments and modeling

Mechanics of Materials

2020

李旭

61

基于内聚力理论的二维二次界面单元在ABAQUS中的UEL程序实现

计算力学学报

2019

李旭

62

多层氧化石墨烯的三维弹性常数及氧化度对力学性能的影响

固体力学学报

2022

文聘

63

Heat Transfer Efficiency Enhancement of Gyroid Heat Exchanger Based on Multidimensional Gradient Structure Design

International Communication of Heat and Mass Transfer

2023

文聘

64

Mechanical behaviors of multidimensional gradient gyroid structures under static and dynamic loading: A numerical and experimental study

Additive Manufacturing

2022

文聘

65

Customizable fabrication for auxetic graphene assembled macrofilms with high conductivity and flexibility

Carbon

2020

文聘

66

Measurement of manufacture assembly stresses in thick composite components using a modified DHD method, Composites Part A

Applied Science and Manufacturing

2020

胡海晓

67

Experimental and numerical studies on the tensile behaviors of thin-ply and thick-ply open-hole laminates

Thin-walled Structures

2023

胡海晓

68

Measurement of manufacture assembly stresses in thick composite components using a modified DHD method

Composites Part A: Applied Science and Manufacturing

2020

胡海晓

69

土壤水分布的孔隙尺度格子玻尔兹曼模拟研究

力学学报

2020

晏石林

70

Topology optimization of Double-Double (DD) composite laminates considering stress control.

Computer Methods in Applied Mechanics and Engineering

2023

钟愉承

73

Experimental investigation of the whirl and generated forces of rotating cylinders in still water and in flow

International Journal of Naval Architecture and Ocean Engineering

2020

陈威

76

单/双自由度旋转圆柱流致振动特性数值计算分析

船舶力学

2023

林永水

80

波导吸振器的低频减振设计和应用

力学学报

2023

林永水

83

Dual-Phase Inspired Soft Electronic Sensors with Programmable and Tunable Mechanical Properties

ACS Nano

2023

林永水

84

Mechanical properties of a novel two-phase hybrid plate-lattice metamaterial

Mechanics of Advanced Materials and Structures

2022

林永水

85

Response of Topological Soliton lattice structures subjected to dynamic compression and blast loading

Thin-Walled Strucutre

2023

曹晓飞